MINIATURE PHARMACEUTICAL FOLDERS: SHEET FED  
   
 
  SEARCH

 
To view our brochure you must have Acrobat Reader. If you do not have a copy, you may download a FREE version from Adobe.
 
NOTE: You can enlarge this website on your screen by pressing the Ctrl and the +/= keys simultaneously.
Download Brochure
The most versatile folder...
From miniature to commercial sizes.
Easy setup and operation.
Zero makeready folding plates for increased production.

Tailored to fit your needs...
Choice of automatic flat pile feeder or continuous bottom suction feeder.
Choice of interchangeable vertical stacker or shingled delivery unit. A motorized shingle unit is available.
Choice of two sizes: 14 3/16" x 25 1/2" & 18 1/8" x 25 1/2".
All-around FL 2 Flat-Pile Feeder uses rear-suction pickup and air blasts for steady sheet separation as the in-feed wheel moves the sheets to the transfer table.
Long alignment table ensures perfect registration.
Electronic double-sheet detector with automatic feeder shut-off for constant quality.
Variable sheet-spacing control for special folding applications.
Two-foot pile height capacity with automatic height adjustment.

Designed for trouble free operation...
2, 4 or 6 folding plates per station—capable of folding down to 5/8" in StationI and down to 3/4" in Station II.
Folds up to a 64-page signature in Station II depending on stock.
Comes with a standard chute delivery.

Download Brochure
FL 2 FLAT-PILE FEEDER option...
REAR SEPARATING FEED SYSTEM
1 Suction heads lift the sheets.
2 Air blasts aerate and separate the sheets, making it possible to feed long or difficult to- handle sheets.
The REAR SEPARATING FEED SYSTEM lifts up and out of the way to make it easy to load the flat-pile feeder,
INFEED SECTION
3 The drum suction wheel, shielded by a safety cover, transfers the paper onto the registration table to the folding rollers.
4 Optional side air blasts aid in the consistent transfer of the sheets.
5 An optional quick-set double-sheet detector ensures accurate feeding.
FL FEEDER option...
SAF FEEDER option...
Continuous-load SAF FEEDER has air channels in the side rails that separate and lift the sheets to allow the bottom-suction drum to draw the paper to the register table.
An adjustable plate levels the feed edge of the paper to ease the transport of the paper onto the register table.
When the side guide is adjusted to the paper width, the feed belt automatically centers to convey the sheets over the anti-static stainless steel register table to the folding rollers in perfect registration.
The gap between sheets of paper can be controlled to allow for gluing or other applications.
The vacuum time on the sheets can be controlled to allow folding of stock as light as 27# offset.
A single control automatically synchronizes the speed of both the feeder and folder for smooth production.
Download Brochure
Variable-speed TRANSFER UNIT aids in the transfer of the folded sheets from Station I to Station II and increases the accuracy of folding small pieces as well as extending the life of the rollers.
MOBILE SHINGLE DELIVERY UNIT is for finished leaflets of more than 3 3/4" in height. Folded products are delivered shingled— one overlapping the other.
It is height adjustable, tilt adjustable and has variable speed for better control of shingling the product. Two widths available: 13 3/4"; 21 1/4".
It is interchangeable with the Vertical-Stack Delivery Unit.
EK-300 KNIFE FOLDING UNIT is for the final fold of leaflets that are too small to be handled in the side guide of the right angle station or too thick for buckle folding down to 1 1/4”.
It has a built-in vertical delivery unit and an optional ejector magnet (kicker) for separating a preset number of finished pieces.
(Specification sheet available)
Heavy-duty commercial ZK-500/ZK-600 KNIFE FOLDING UNIT makes a final up or down cross fold.
It can also be used off-line for folding signatures, booklets (up to a 144-page, depending on stock), or any special commercial folding applications. (Specification sheet available)
Download Brochure

 

VIJUK-G&K V-14/V-18 FOLDER SPECIFICATIONS
MODEL V-14 (FA/36) V-18 (FA/45)
Number of stations 1 to 3 1 to 3
Number of plates per station 2, 4, or 6 2, 4, or 6
Smallest fold Station I 5⁄8" 5⁄8"
Smallest fold Station II and III 3⁄4" 3⁄4"
SAF feeder max sheet size 14 3⁄16" x 25 1⁄2" 17 3⁄4" x 25 1⁄2"
SAF feeder min sheet size* 3 1⁄4" x 3 1⁄2" 3 1⁄4" x 3 1⁄2"
FL2 feeder max sheet size 14 3⁄16" x 33" 17 3⁄4" x 33”
FL2 feeder min sheet size 4 1⁄4" x 5 1⁄2" 4 1⁄4" x 5 1⁄2"
Production speed 500 ft./min. 500 ft./min.
Electrical 220V, 3ø, 60 cycle 220V, 3ø, 60 cycle
*Optional modification is available for the minimum sheet size of 2 3⁄4" x 3 1⁄2" on the SAF feeder.
 
FEATURES
 
 
FEATURES

FOLDING/
DEFLECTOR PLATES
FOLDING/ DEFLECTOR PLATES are made of durable chromium-plated steel for anti-static operation and long wear.  
 Without removing the plate, a simple turn of the ADJUSTMENT DIAL (1) determines whether it is a folding plate or a deflector plate.
 A gate-fold folding plate is also available.
 
FEATURES

QUICK-SET FOLDING ROLLERS
QUICK-SET FOLDING ROLLERS give you quick and easy setups and changeovers. Insert paper in the caliper device, and the roller pressure is automatically adjusted.
Rotating on needle and axial bearings, the large diameter folding rollers allow you to fold heavier stock such as greeting cards.
 
FEATURES

SLITTING SHAFTS
Heavy-duty adjustable SLITTING SHAFTS provide optimal perforating, slitting and scoring.
Its quick-release feature reduces setup and changeover time.
 
FEATURES

SAF FEEDER
Continuous-load SAF FEEDER has air channels in the side rails that separate and lift the sheets to allow the bottom-suction drum to draw the paper to the register table.
An adjustable plate levels the feed edge of the paper to ease the transport of the paper onto the register table.
When the side guide is adjusted to the paper width, the feed belt automatically centers to convey the sheets over the anti-static stainless steel register table to the folding rollers in perfect registration.
The gap between sheets of paper can be controlled to allow for gluing or other applications.
The vacuum time on the sheets can be controlled to allow folding of stock as light as 27# offset.
A single control automatically synchronizes the speed of both the feeder and folder for smooth production.
 
FEATURES

STATION II FOLDING UNIT
This is the overview of the right-angle Station II folding unit showing the rust, static, and wear resistant alignment table.
The stations can also be used in tandem for parallel folding.
Stations can have 2, 4, or 6 folding plates.
 
FEATURES

VERTICAL-STACK DELIVERY UNIT

VERTICAL-STACK DELIVERY UNIT is optional for stacking folded products in an upright position for easy, orderly collection. (The machine comes with a standard Chute Shingle Delivery Unit.)
It has an independent motor drive
A built-in ejector magnet (kicker), controlled by the MCS-106 Predetermined Counter, kicks out pieces to mark the batches.
Three widths #KS-235: 9 1/4"; #KS-310: 12 1/4"; #KS-370: 14 5/8"

1 Optional REMOTE CONTROL, which can be hand held, allows the operator to start and stop production without returning to the main panel.
 
FEATURES

CONTROL PANELS

CONTROL PANELS are ergonomically located.

1 The optional MCS-106 PREDETERMINED COUNTER, mounted over the SAF feeder control panel, performs total and batch counting.
The counter swivels to improve visibility to the operator.
It displays readouts of the total and batch counts and the current production speed by digital tachometer.
A 0- to 10-second delay can be set to pause the feeding process to create batches.
For batch counting with the vertical-stack delivery, you enter the number of pieces per batch to trigger the unit's ejector magnet which "kicks out" a piece to mark a batch.

2 SAF CONTROL PANEL has dual start buttons to guard against accidental starts while setting up.
A single-sheet control allows sheets to feed into the folding unit at a reduced cycle to minimize setup time during changeovers.
The sheet length, the gap between sheets and the vacuum time on the sheets can be precisely programmed for trouble-free production.
 
FEATURES

BELT DRIVE SYSTEM
BELT DRIVE SYSTEM is located on the outside of the machine (behind safety covers) for easy access.
Universal joints ensure consistent, trouble-free operation
 
FEATURES

BELT DRIVE SYSTEM
BELT DRIVE SYSTEM is located on the outside of the machine (behind safety covers) for easy access. Universal joints ensure consistent, trouble-free operation
 
  ©Vijuk Equipment Inc.