MINIATURE PHARMACEUTICAL FOLDERS: ROLL FED  
   
 
  SEARCH

 
To view our brochure you must have Acrobat Reader. If you do not have a copy, you may download a FREE version from Adobe.
 
 

Equipped with the RS 42 unit to plough-fold the first fold before continuing to the RS 21 or 31 unit for completion of the folding process.
The RS 21 or 31 unit of this machine can be equipped with 4 or 6 folding plates, if required.
For additional folding requirements, the Vijuk – G&K SVA/35 Station II and/or EK 300 Knife Folding attachment can be added.

See Vijuk-G&K RS 21/880 Folder with ARW 21/2 Automatic Splicer / Roll Changer for information on the 880 series folder.

 

 
 

MCS-106 Predetermined Counter:
Digital display readout of batch counting and production speed by digital tachometer.
Controls the ejector magnet (kicker) that "kicks out" a finished piece at a preset number to indicate batches of finished pieces.
0 to 10 second delay setting can be used to pause the feeding process between batches.
Dual start buttons guard against accidental starts while setting up.
Stop buttons for deactivating feeder cycle and emergency stops.

Not Pictured:
Various Gluing Attachments (cold & hot)
Bar Code Scanners (To read printmark on one side or both sides of leaflet)
Sound Reduction Hoods

 
 


VIJUK-G&K EK 300 Knife Folding Attachment:
When leaflets are too small to be handled in the right angle or too thick for buckle folding, the EK 300 can make that one final cross-fold and is designed for folding miniature/pharmaceutical leaflets down to 1/2".
The EK 300 has a built-in vertical delivery unit and an optional ejector magnet (kicker) for separating a preset amount of finished pieces.
   
VIJUK-G&K SVA Folder Station II or Station III
   
MV-97 Outsert Attachment...
Ribbon style or RTA (right-turn-angle) style MV-97 Outsert Attachments (patented) can be added to the SVA folders for the production of miniature outsert leaflets.
The MV-97 Ribbon Style Outsert Attachment makes parallel folds, slits, and glues--producing outserts on a multiple-up basis.
The MV-97 RTA (right-turn-angle) Style Outsert Attachment makes cross (perpendicular) folds and glues--giving you the ability to fold larger-size leaflets to meet the demands for increased copy space.
Outsert attachments can be attached to either Station I or Station II.
The MV-97 comes with eight standard gluing heads. A ninth head is optional.
The MV-97 Outsert Attachments can also be attached to the RS Series Folders and the H+H KL 112 Folders.
   
MV-97 OUTSERT ATTACHMENT DETAIL
   
Single Roll Stand Double Roll Stand
   
Single Roll Stand w/Splicing Device & Adhesive Table Double Roll Stand w/Splicing Device & Adhesive Table
   
   
Roll Stand Specifications
Maximum reel diameter 23 - 5/8" (600 mm)
Maximum reel width 8 - 1/4" (210 mm)
Minimum reel width 2 - 3/8" (60 mm)
Reel core diameter 3" (76 mm)
   
EK 300 Specifications
Maximum size coming into knife 2" x 11-3/4"
Minimum size coming into knife 1/2" x 3-1/4"
Maximum folded size 2" x 5-7/8"
Minimum folded size 1/2" x 1-5/8"
Production speed up to 17,000 leaflets/hour
Net weight 101 lbs.
Space requirements 1' 10-3/4" x 2' 6-3/4"
Electrical 220v, 3ø, 60 cycle, .2 kw

 
       
MODEL
 RS 42/830 RS 42/850 RS 421/880
Maximum width 16 - 5/8" 16 - 5/8" 16 - 5/8"
Minimum width 2 - 3/8" 2 - 3/8" 2 - 3/8"
Maximum cut-off 13 - 3/8" 18" 13 - 3/8"
Minimum cut-off 2 - 5/8" 2 - 5/8" 2 - 5/8"
Speed
(leaflets per/min.)*		 up to 250* up to 200* up to 450*
* Production speed will vary depending on stock & cut-off length.
** Production speed reduces slightly during automatic roll splicing & changing.

 
Equipped with the RS 42 unit to plough-fold the first fold before continuing to the RS 21 or 31 unit for completion of the folding process.
  ©Vijuk Equipment Inc.