RS 21/070

MINIATURE PHARMACEUTICAL FOLDERS: ROLL FED

To view our brochure you must have Acrobat Reader. If you do not have a copy, you may download a FREE version from Adobe.

NOTE: You can enlarge this website on your screen by pressing the Ctrl and the +/= keys simultaneously.

Download Brochure

Why you should consider roll-fed folding…
HIGH SPEED, HIGH VOLUME
• Vijuk-G&K RS Roll-Fed Folders are unsurpassed for high-speed, high-volume folding of leaflets for the pharmaceutical, cosmetic, and small novelties industries.

ASSURE INTEGRITY OF THE JOB
• Minimizes the possibility of leaflet mix-ups.

SAVE ON COSTS
• Roll paper is less expensive than cut sheets.
• Minimal paper waste because there is no trimming.
• Minimal product spoilage because there are no sheets to double or become misaligned and there are fewer jams.

SAVE TIME
• No pre-cutting is necessary. Sheeting is done automatically on-line, saving valuable production time.
RS 21/070 Description RS 21/070 Roll-Fed Folder…
This high-speed folder is ideal for installing onto packaging lines (A top mount roll feed, B direct floor mount feed, C 90º floor mount feed with optional deviation device).
Attaches to the drive of the packaging line by chain or toothed belt.
It can be equipped to operate off-line D.
Set up is easy with quick-set caliper rollers and micrometer dials for fine tuning. Digital roller setting is available.
Rollers are belt-driven for quiet operation, low maintenance and long wear.
Roll stand options are shown under attachments. Automatic roll changing is available.

Roll Sheeting…
A separate draw-off roller is required for each leaflet length. The draw-off roller advances the roll paper to the length of the leaflets to be folded.
When the length is confirmed by the electronic reading of a print mark on each leaflet, sheeting is automatically done by a rotary knife.

Packaging-line system…
The leaflet draw-off and knife shaft are synchronized 1:1 with the packaging line.
The cut-to-length sheet is transferred to the folder for processing.
The folded leaflet is delivered to the cartoning section of the packaging line.
The roll feeders on machine C and D are single-roll stands with the splicing station.

Off-line system…
The cut-to-length sheet is transferred to the folder for processing.
The folded leaflet is delivered on the vertical-stacking delivery unit.
The roll feeder on pictured machine is a single-roll stand with a splicing station feeding directly into the folder.

Speed…
RS 21/070 production speeds are up to 320 leaflets per minute (depending on stock and cut-off length).

Take steps to start saving by filling out the information request form.

Download Brochure

MCS-106 Predetermined Counter
It performs and displays readouts of the total and batch counts and the current production speed by digital tachometer.
A 0- to 10-second delay can be set to pause the feeding process to create batches.
For batch counting with the vertical-stack delivery unit on the stand-alone folding system, you enter the number of pieces per batch to trigger the unit’s ejector magnet which staggers pieces to mark batches.

Not Pictured:
Various gluing attachments (cold & hot)
Bar code Scanners (Read bar codes on one side or both sides of leaflets)
Digital roller adjustment
90º deviating device
Splicing station for roll stands with servo drive
Sound-reduction hoods

Download Brochure

	*Smoother production using roll stands with servo drives…* The servo drive is synchronized with the packaging-line along with the folding system. It unwinds the roll paper as required by the folder draw-off roller. Solves the difficulty of unrolling paper at the end of the roll! There is no stress or pull on the paper throughout the dispensing of the whole roll—even at the end of the roll when it is more difficult to unroll the paper and there is the risk of stretching or tearing the paper. The roll stands with a servo drive are ideal for high-speed or intermittent production.
Single-roll stand

Double-roll stand	Single-roll stand with servo drive (splicing station is optional)

Single-roll stand with splicing station

Double-roll stand with splicing station	Double-roll stand with servo drive with splicing station (splicing station is optional)

ARW Automatic Splicer/Roll Stand with servo drive and Siemens 57 Controller	*Save valuable production time with automatic roll changer…* The ARW 21/2 Automatic Splicer/Roll Stand allows continuous production, eliminating the need to stop the system for a roll change. It handles paper widths up to 8-1/4 inches (210 mm). It has a servo drive and a Siemens 57 Controller. *How it works…* As the first paper roll nears the end, the system reduces its speed to 150 leaflets per minute and will operate with the accumulated reserve of paper. When the end of the roll in production reaches the splicing station, it is overlapped with the start of the next roll and attached with double stick tape in the splicing station. When splicing is completed, the system resumes high-speed production.

Download Brochure

Number of plates		4 or 6
Folding width max		8 1⁄4" (210 mm)
min		2 3⁄8" (60 mm)
Smallest fold		5⁄8" (15 mm)
Sheet length max		12 3⁄8" (315 mm)
min		4 1⁄4" (105 mm)
Roll diameter max		23 5⁄8" (600 mm)
Roll width max		8 1⁄4" (210 mm)
min		2 3⁄8" (60 mm)
Roll core diameter		3" (76 mm)
Production speed		up to 320/min.*
*Depending on length of the leaflets.

Unsurpassed for high-speed, high-volume folding of leaflets.